Wholesale Rolled Wire Fencing For Dogs Supplier
Rolled wire fencing consists of galvanized steel wire formed into a continuous roll, providing a flexible barrier that can be uncut to required lengths and secured with staples or tension wires. The
Request a QuoteWholesale Rolled Wire Fencing for Dogs
Rolled wire fencing consists of galvanized steel wire formed into a continuous roll, providing a flexible barrier that can be uncut to required lengths and secured with staples or tension wires.
Material and Construction
The core wire is typically low‑carbon steel, cold‑drawn to achieve a tensile strength of 350–450 MPa. After forming the mesh, the wire undergoes hot‑dip galvanization, delivering a zinc coating weight of approximately 275 g/m² (equivalent to a coating thickness of about 20 µm) to resist corrosion in outdoor environments.
Mesh openings are uniform squares, commonly 50 mm × 50 mm or 75 mm × 75 mm, with wire diameters ranging from 2.0 mm to 3.0 mm depending on the required load rating. The roll width is usually 1.0 m to 1.5 m, and lengths are supplied in 20 m, 30 m, or 50 m increments.
Typical Specifications
| Parameter | Typical Value | Notes |
|---|---|---|
| Wire Diameter | 2.0 mm – 3.0 mm | Selected per load requirement |
| Mesh Opening | 50 mm × 50 mm or 75 mm × 75 mm | Square aperture |
| Tensile Strength | 350–450 MPa | Cold‑drawn low‑carbon steel |
| Zinc Coating | ≈275 g/m² (≈20 µm) | Hot‑dip galvanized |
| Roll Width | 1.0 m – 1.5 m | Custom widths available |
| Standard Lengths | 20 m, 30 m, 50 m | Lengths can be spliced |
Applications in Containment Systems
Rolled wire fencing is chosen for dog enclosures because the continuous roll allows installers to follow irregular property lines without creating multiple joints, reducing potential weak points where a dog could push through.
- Perimeter kennels for breeding facilities
- Temporary holding areas at veterinary clinics
- Residential backyard runs where aesthetic visibility is desired
- Agricultural livestock separation when combined with a bottom rail
Quality Control Philosophy
Each production lot undergoes dimensional verification using laser micrometers to confirm wire diameter and pitch within ±0.05 mm. Coating thickness is measured by magnetic induction on a random sample of 5 % of the roll length, with acceptance criteria set at ≥250 g/m² zinc.
Tensile tests are performed on specimens cut from the roll ends, ensuring the break load meets the specified range before the product is released for wholesale distribution.
Customization Options
Buyers can specify alternative mesh geometries, such as rectangular openings (e.g., 100 mm × 50 mm) to accommodate specific dog sizes, or request a PVC overcoat for added UV resistance and color coding.
- Wire diameter: 1.8 mm to 4.0 mm
- Opening size: 25 mm to 100 mm
- Coating: hot‑dip galvanized, galfan, or polyester powder
- Roll length: custom cuts up to 100 m
Packaging and Shipping
Rolls are wound on a sturdy cardboard core with an internal diameter of 76 mm, then wrapped in stretch film and placed in a corrugated cardboard sleeve. This method protects the galvanized surface from abrasion during transit and facilitates handling with standard forklift tines.
For export shipments, each pallet is secured with PET straps and equipped with corner boards, meeting ISPM‑15 requirements for wooden pallets when applicable.
Frequently Asked Questions
Yes. Widths from 0.8 m to 2.0 m are available upon request, with corresponding adjustments to length and weight.
Desired wire diameter, mesh opening, coating type, roll width, total linear meters, and delivery destination.
Dimensional checks, coating thickness measurement, and tensile testing per lot, with test reports available on request.
Standard stretch‑film wrapped rolls on cardboard cores; optional wooden crates for high‑value orders.
Contact for Wholesale Inquiry
To discuss specifications, request a sample roll, or obtain a detailed quotation, please reach out via the contact form.
Request Quote
